Pay in installments of $5.83 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 14 - Aug 19
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
ir cab pedal Strymon Iridium Amp & IR Cab Simulator Pedal BundleThis Bundle Includes everything you need to get started with your new guitar pedal! This Bundle Includes: Strymon Iridium Amp & IR Cab Pedal Z12AIRID Strymon Power Adaptor Fender 6" Patch Cable 0990820010S Planet Waves 10' Instrument Cable PWCGT10 Alamo Music Center Sticker LOGOSTICKER Strymon Iridium Amp & IR Cab Pedal gives you three iconic amplifiers, with a total of nine impulse response speaker cabinets that complement the tonality of the amp.
This Bundle Includes everything you need to get started with your new guitar pedal!This Bundle Includes:
Strymon Iridium Amp & IR Cab Pedal - Z12AIRID
Strymon Power Adaptor
Fender 6" Patch Cable - 0990820010S
Planet Waves 10' Instrument Cable - PWCGT10
Alamo Music Center Sticker - LOGOSTICKER
Strymon Iridium Amp & IR Cab Pedal gives you three iconic amplifiers, with a total of nine impulse response speaker cabinets that complement the tonality of the amp.
SOUND DESIGN:
Three amplifier models crafted using Matrix Modeling, capturing the subtleties and unique tonal qualities of each amp
Round Amp - based on* a Fender Deluxe Reverb
Chime Amp - based on* the Brilliant channel of a Vox AC30
Punch Amp - based on* a Marshall Plexi (Super Lead model number 1959)
Nine Impulse Response speaker cabinets, 24bit / 96kHz 500ms
Stereo (three per amp type), pre-loaded with a curated set of IRs:
Deluxe Reverb 1×12″ by OwnHammer
Blues Junior 1×12″ by CabIR
Vibrolux 2×10″ by CabIR
AC30 2×12″AlNiCo by OwnHammer
1×12″ AlNiCo by Celestion
Mesa 4×12″ by Valhallir
GNR 4×12″ by OwnHammer
2×12″ Vintage 30 by Celestion
Marshall 8×12″AlNiCo by CabIR
Load your own impulse responses using Strymon Impulse Manager software
Hybrid IR/algorithmic Room control with selectable small, medium, and
large rooms
Simple, responsive amp-style controls for Drive, Level, Bass, Middle,
and Treble
Premium stereo high impedance discrete JFET analog front end with
up to 22dB of pure analog gain
INS, OUTS & SWITCHES:
Stereo Input (requires TRS adapter cable)
Stereo Output
Operates at instrument and Line Level input sources
Discrete transistor headphone amplifier
Expression pedal input provides seamless morphing between knob positions (Expression mode), or smooth pre/post volume control with logarithmic taper (Volume mode)
USB jack for connecting to Strymon Impulse Manager software
to add and edit your own speaker cabinet IRs
Compatible with Strymon MultiSwitch Plus for remote selection of up to 4 presets
Full featured MIDI control accessible via EXP Jack for remote parameter control and access to 300 preset locations (requires Strymon MIDI EXP cable or MIDI to TRS interface)
AUDIO QUALITY:
Ultra-low noise, high performance 24-bit 96kHz A/D and D/A
converters provide uncompromising audio quality
Super high performance SHARC and ARM co-processors
32-bit floating point processing
MISC.:
Transparent Analog Buffered Bypass
Strong and lightweight anodized black aluminum chassis
9V DC power supply included
Power requirements: maximum 9 volts DC center-negative, with a minimum of 500mA of current
Dimensions:
4.5″ deep x 4″ wide x 1.75″ tall
11.4 cm deep x 10.2 cm wide x 4.4 cm tall
Designed and built in the USA
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 27 reviews
Sort
Product Reviews
★★★★★ 5
Strong legs, somewhat industrial but trendy also
Size: side table leg
Good legs, some what utilitarian or industrial, they are strong as they are made out of pipe, and assembly is fairly easy once you get the idea of how it goes together. They are roughly 1.5 feet across maybe a bit less adjustable height on each leg, if you have wood floors you may want to put a pad under each leg as they are full metal pipes. Pretty interesting idea and does not cost much.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
★★★★★ 4
Pretty good, take your time and install it well
Size: side table leg
Materials are pretty solid, but once assembled it’s not as sturdy as you would think it should be since the material itself was solid, i say give them a chance, everything out there that’s similar is way over priced
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 5
Heavy duty legs for table.
Size: side table leg
Perfect legs for a table I am having made. I have an cottonwood slice. It's heavy and needed something substantial.
These are perfect.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
★★★★★ 5
Robust pipe & fittings with a beautiful, smooth black finish
Size: side table leg
This set of pipe & fittings for use as low table legs is heavy duty and aesthetically pleasing. Especially when the pieces are handled, the tactile sensation is much nicer than with plumbing steel pipe because this product is beautifully finished smooth. The black pipes are quite smooth as well as the fittings.
The pieces are all also pretty robust, though the wall thicknesses are less than in pipe for pressurized water systems. Of course that makes sense as this product does not need to hold fluid pressure.
In my view they got the heaviness factor of this product just right; it's not as heavy or robust as black pipe used in natural gas supplies, but still robust and pretty heavy. Assembled, this product is absolutely stiff and unyielding for a solid table that could hold a man's weight easily.
The feet utilize a brilliant scheme so that each foot can be independently adjusted for an uneven floor. Thus a level table on an uneven floor is easily accomplished. The feet simply extend the effective leg length by screwing counter-clockwise. To prevent any shifting at the threads adding some pipe compound or teflon tape may be advised. Even masking or duct tape might work as the idea is to just fill any gaps where male threads meet female threads.
The four flanges at the tops of the legs provide a wide, solid surface for attaching the table top, with either hidden screws underneath or you could through-bolt a glass table top (provided you have the skill to drill glass!). I think this product would look great with a glass top.
Assembly is quick and easy. The hardest part is drilling holes underneath the table top to accept screws. No pipe wrenches are needed as the pieces screw together by hand to an adequate tightness. If any doubt whether they are tightened enough have a strong person with grippy gloves finish. The "X" in the center attaches to the legs with a very clever machine screw system tightened with the included hex wrench. This is presumably because if tightened simply by screwing the fittings, the point of snugness would not likely be where the "T" fittings are exactly vertical. The maker has solved this problem so that you are assured that all legs will be in the perfect vertical position once everything is tight. The setup is also nice and rigid once tightened. This is a huge benefit of steel pipe projects; they are really solid.
The black finish is clearly very durable, like a powder coat. It appears that it will provide excellent protection against rust. Coverage is complete; I found no dings or scratches anywhere on any piece.
Overall this is a very well-designed product for function and aesthetics. Perfect for a beautifully renovated warehouse condo where an industrial vibe is desired in a rock-solid table that won't shift around. The smoothness of the pipe is top notch. I've used lots of pipe in projects, some of it actual water pipe and some decorative pipe such as this. I've never seen better quality decorative pipe as this maker put in the effort to finish it beautifully smooth. At currently $34.99 I find the price quite reasonable too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
★★★★★ 3
the height is only 16"
Size: coffee table leg
The height is only 16". From the description it appears to be 24" wide and 24" high.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
recommand products
Reacha Sport Fahrradanhänger
23.17
Transportanhänger / Fahrradanhänger 90 Liter
24.60
Reacha Sport Fahrradanhänger
27.79
THULE Fahrradanhänger CHARIOT CROSS 2 Double mieten & testen - Kauf-Option inkl
23.43
Richtig viel Platz im Lastenrad SachsenRAD T1 Grand Trunk. Mit 3-Punkt Sicherheitsgurten für Ihre Kinder, mit zusätzlicher Bremssperre gegen das Wegrollen beim Aus- und Einsteigen bzw. Ein- und Ausladen. Das E-Lastenrad besitzt
28.57